Pearson Technologies Site Map
Training Technical Services Benefits Satisfied Clients Free Resources
Gallery Training Products Contact Experience
Fiber Optic Services And Products
USED TRAINING AND
INSTALLATION PRODUCTS
Products described below are:
5 fusion splicers
3 OTDRs
6 Fotect test sets
ST- compatible multimode connectors
SC multimode connectors
fiber on reels for splice training
Ribbon Fiber On Reels For Splice Training
150 foot reels of 2mm 62.5 m Cable
Occasionally, we find fiber optic products and supplies at prices that are unbeatable for training or installation. These products, listed below, are new or used.
We qualify used products to guarantee that they work as advertised. If you do not see what you need, call us for a no-charge, brief discussion of your needs and interests. If we are unable to assist you, we may be able to refer you to a person or organization that can assist you.
Delivery is from stock.
All items have limited stock and are subject to prior sale.
For purchasing details, click here.
Fujikura FSM 20CSII Single Fiber Fusion Splicer
This Fujikura Model FSM-20CSII single fiber, core alignment, splicer is perfect for field use and for training in mid span and pigtail splicing. The splicer has holders for 1 fiber.
FSM 20 CSII Fusion Splicer
This unit splices same fibers with typical loss of less than 0.15 dB, which is the maximum specification recommended by the FOA. Typical loss is below 0.07 dB. Often, we see 0 dB singlemode splices.
The splicer has 20 built in menus for multimode and singlemode fibers. The splicer has 110 VAC and 12 VDC inputs. The splicer has built-in fusion splice cover-heating oven. We have been using this splicer in training for the last 2 years without any problems.
This splicer has so many features that you will agree that it is a bargain. 22 of these features are:
1. 20 built-in menus to splice almost any type of fiber
2. the ability to modify these menus to minimize loss
3. measurement of the cleave angle of the fibers in two axes
4. an adjustable cleave angle acceptance value
5. automatic estimation of splice loss
6. memory for 100 splice loss measurements
7. DC operation for field use
8. AC operation for laboratory and inside use
9. compensation for atmospheric pressure
10. wind protection cover
11. eccentricity correction so that off center cores have low loss
12. mechanical cover locks for shipment without damage
13. video output port for external NTSC monitor
14. automatic cleaning of both fibers
15. a built in splice cover heating oven
16. two splice cover lengths
17. a rugged design that allows shipment without damage (But do not drop splicer from 4 feet!)
18. Transit cover to protect alignment mechanism during shipment.
19. On screen display of cleave angles and estimated loss
20. automatic strength test of each splice
21. easy replacement of electrodes
22. long electrode life (We have used the electrodes to over 2500 splices without increase in splice loss).
Prior to sale, we install new electrodes. The manufacturer recommends electrode replacement after 1000 splices. We have used some of our Fujikura splicers to 2500 splices on the same electrodes without reconditioning the electrodes.
With the splicer, we supply manual and test results of ten singlemode splices with the splicer. Splicer is guaranteed to function as specified upon receipt.
With all these features, you can understand the reason that the new units sold for $22,000.
Our price for this impressive splicer is a bargain at $3750.
Adder for CT04 or CT07 cleaver: $500.
Adder for a CT04 with a new scribing blade: $625. The new blades are claimed to offer 12,000 cleaves.
Adder for extra electrodes: $70
Fujikura FSM 30S Single Fiber Fusion Splicer
These Fujikura Model FSM 30S single fiber (Photograph below, upper left), core alignment, splicers are perfect for field use and for training in mid span and pigtail splicing. The splicer has holders for 1 fiber (Photograph below, upper right).
Large Screen Makes Splicing Easy
Close Up View Of Fiber Holders And Alignment Mechanism
Splicer In Use In Advanced Splice Training
Close Up View Of Splice Cover Oven And Control Panel
This unit splices same fibers with typical loss of less than 0.15 dB, which is the maximum specification recommended by the FOA. Typical loss is below 0.05 dB. Often, we see 0 dB singlemode splices.
The splicer has 34 built in menus for multimode and singlemode fibers. Splicer has automatic operation of the entire process and an option for step by step review of the process. We use the step by step option for training so trainees can see the results of their activity before the splice is made. The step by step option allows trainees to determine whether they have followed the proper procedure.
Splice cover heating and cooling is automatic.
The splicer has 110 VAC and 12 VDC inputs. The splicer has a built-in fusion splice cover heating oven (Photograph below, lower right). We have been using this splicer in training for the last 3 years without any problems. This splicer has a screen (Photograph below, lower left) larger than that of the FSM 20CSII (above).
This splicer has so many features that you will agree that it is a bargain. 23 of these features are:
1. 34 built-in menus to splice almost any type of fiber
2. the ability to modify 20 menus to minimize loss
3. the ability to adjust the process to make attenuators
4. measurement of the cleave angle of the fibers in two axes
5. an adjustable cleave angle acceptance value
6. automatic estimation of splice loss
7. memory for 100 splice loss measurements
8. DC operation for field use
9. AC operation for laboratory and inside use
10. compensation for atmospheric pressure, temperature, and humidity
11. wind protection cover
12. eccentricity correction so that off center cores have low loss
13. mechanical cover locks for shipment without damage
14. video output port for external NTSC monitor
15. automatic cleaning of both fibers
16. a built in splice cover heating oven
17. two splice cover lengths
18. a rugged design that allows shipment without damage (but do not drop splicer from 4 feet)
19. a large screen for viewing alignment and measurements
20. on screen display of cleave angles and estimated loss
21. automatic strength test of each splice
22. easily replacement of electrodes
23. long electrode life (We have used the electrodes to over 2500 splices without increase in splice loss).
We supply manual and test results of ten singlemode splices with the splicer. Splicer is guaranteed to function as specified upon receipt.
With all these features, you can understand the reason that the new units sold for $39,000. Our price for this impressive splicer is a bargain at $4950.
Adder for CT04 or CT07 cleaver: $500. Adder for a CT04 with a new scribing blade, $625. The new blades are claimed to offer 12,000 cleaves.
Adder for extra electrodes: $70
Fujikura CT07 and CT04 cleavers
These exceptional cleavers will provide excellent service in training and field installation. Some have been reconditioned with new parts. All provide low cleave angles. Average cleave angle is below 0.7 degrees. The fiber alignment plate allows cleaving of 250 m fiber and 900 m tight tubes.
Precision Cleavers Produce Typical Angle Below 1 Degree
While we cannot claim that these used cleavers are the best available, we have made more than 6000 cleaves and splices with these cleavers, with typical splice losses under 0.07 dB. Almost all cleave angles are under 0.7degrees, with many values between 0 and 0.4 degrees. For our money, you cannot get better performance for the money.
We documented the cleave angle test results Eye on Fiber, Vol. 1, Issue 2.
We supply a manual, a cover, and test results from ten cleaves with the cleaver. The test results will average less than 1 degree.
First come, first serve. When we run out, we do not expect to be able to obtain more at this low price.
With cost of new cleavers between $1200 and $1500, our price, while they last, is an incredibly low $500.00. For $625, we will supply the cleavers with a new scribing blade. The new blades are claimed to offer 12,000 cleaves. We run out of units that average less than 1 degree,
Buy now, so you will not kick yourself later!
Siecor miniMASS ribbon and single fiber fusion splicer
Corning Cable Systems reconditioned this unit in 2/07. It has fewer than 30 splices. We sell this with splice data on 5 splices. This unit is guaranteed to perform as indicated.
This Siecor miniMASS core alignment ribbon splicer is perfect for
field use and for training in mid span and pigtail splicing (Photograph below,
upper left). The splicer has holders for 1 fiber, 4 fiber, 6 fiber, 8 fiber and
12 fiber ribbons. The splicer comes with:
1. heavy duty, suitcase type carrying case (Photograph below, bottom left)
2. cleaver (Photograph below, middle right)
3. thermal stripper (Photograph below, middle left)
4. two batteries
5. light
6. brushes
7. AC power cord
8. 6 sets of holders and
9. splice tray holder.
After we bought it, we sent it to Siecor for a major, $2200 overhaul. It has
worked flawlessly for the last 3 years. It works like new (Photograph below,
upper right).
Ribbon Splicer In Hard Carrying Case
Ribbon Cleaver And 8 Fiber Holders Included
Thermal Stripper Included
Splicer In Use With Automatic Menu On Screen
This unit splices same fiber ribbons with typical loss of less than 0.15 dB,
which is the maximum specification recommended by the FOA. Typical loss is
below 0.07 dB.
We supply manual and test results of ten splices with the splicer. Splicer is guaranteed to function as specified upon receipt.
The price of a new splicer is $28,000.
Because you could pay our price for a used single fiber splicer, this ribbon splicer is a bargain at $6950.
Adder for heavy duty shipping case (Photograph below, bottom right): $175
USED FOUR WAVELENGTH Tektronix 3031 OTDR
These Tektronix Model 3031s test multimode and singlemode at a total of four wavelengths: 850 nm, 1300 nm, 1310 nm, and 1550 nm. It stores traces to floppy disk or to hard drive. We include a manual, ST-compatible, battery back, AC power cord, power supply, instruction manual and soft case.
3031 Screen With Training Trace
Tektronix has a well-deserved reputation for accuracy and reliability. We started using this family of OTDRs in 1996. In fact, at request of a friends, I helped motivate Tek management to design and offer the multimode unit. We are still impressed and delighted with the performance. We have been using this unit for the last four years with excellent results.
Brand new, these units sold for $20,00-$24,000. Price for this OTDR with carrying case, keyboard and battery pack: $5,900. Without keyboard, $5,700.
We recommend use of a launch cable to protect the OTDR port from damage.
Adder for 62.5 m multimode launch cable with either ST-compatible or SC connectors: $100
Adder for singlemode launch cable with either ST-compatible or SC connectors: $100.
Adder for light duty metal carrying case with foam internal pads (Photograph below, bottom): $55.
Hard Carrying Case For Tektronix Or EXFO OTDRs
Four Wavelength EXFO FTB100 OTDR
This touch-screen, EXFO Model FTB100 tests multimode and singlemode at a total of four wavelengths: 850 nm, 1300 nm, 1310 nm, and 1550 nm. It stores traces to floppy disk, flash card or to hard drive.
EXFO Touch Screen With Training Trace
Traces can be displayed with a data projector, making this the perfect OTDR for training. The screen is a touch screen, so you can drag the cursers to the location you want.
We include ST-compatible or SC adapter, battery back, AC power cord, AC power supply, instruction manual and soft case.We have been using this unit for the last two years with excellent results.
Price for OTDR with carrying case and battery pack: $6,950.
We recommended use of a launch cable to protect the OTDR port from
damage. Adder for 62.5 m multimode launch cable with either ST-compatible or
SC connectors: $100
Adder for singlemode launch cable with either ST-compatible or SC connectors:
$100.
Adder for light duty metal carrying case with foam internal pads (Photograph
above, bottom): $55.
USED TWO WAVELENGTH
MULTIMODE TEST KIT
This test kit is ideal for both trainers and installers. This test kit allows you to test 62.5 m cables with either ST-compatible or SC connectors with the same results as a test set that is in full compliance with TIA/EIA-568-B. With additional 50 m reference leads, you can test 50 m cables. With additional LC reference leads, you can test LC cables. [TIA/EIA-568-B requires a Method B, single lead reference test and a Category 1 source.]
This test kit consists of a
1. source
2. power meter
3. ST-compatible meter adapter (Photograph below, top right)
4. SC meter adapter (Photograph below, top right)
5. LC meter adapter (Photograph below, top right)
6. one mandrel for 62.5 m core reference cables (Photograph below, bottom)
7. one mandrel for 50 m core reference cables (Photograph below, bottom)
8. 2 ST-compatible 62.5 m reference cables
9. 2 SC 62.5 m reference cables
10. 2 ST-compatible barrels (Photograph below, bottom)
11. 2 SC barrels and an (Photograph below, bottom)
12. AC power supply (Photograph below, bottom).
The source is a Fotec Model S dual wavelength (850 nm and 1300 nm) stabilized light source (Photograph below, top left). This source is a Category 2 source that provides the same loss measurements as a Category 1 source from 2 m to at least 220 m (See Part 1 of Eye On Fiber, V.2, I3 for test data.)
Fotec Test Set With Method B Reference
Our testing indicates that the stability of output power is excellent: within 0.05 dB during operation with the AC supply.
Stability with battery operation will be the same until the battery approaches the end of its useful life. The LED status indicator goes out before the battery reaches the end of its useful life, so you can make additional accurate measurements.
The meter is a Fotec M with calibrations at 850 nm, 1300 nm and 1550 nm (Photograph below, top right). The meter measures absolute power level in dBm dB, mW, and W. The meter measures relative power in dB, so the meter reading will be the link loss. The display indicates mode of operation, wavelength of calibration and power level at resolutions of either 0.1 dB or 0.01 dB. The 0.01 dB resolution is ideal for laboratory testing and training.
Battery life is excellent: it can be 6 months.
Fifteen years ago, we were so impressed with the quality and performance of Fotec equipment that we standardized our training programs on these products. We have never regretted that decision. We have been using Fotec Ms for 23 years without a single failure.
The mandrels are for 3 mm, 62.5 m reference cables and comply with the testing requirements of TIA/EIA-568-B (Photograph below, bottom).
The reference leads have singlemode connectors and are qualified to a single ended loss of below 0.5 dB. Typical single end losses are 0.3 dB or less. With these qualified leads, good connectors will test good. The risk with unqualified leads is that good connectors can test bad.
The
price of a comparable new kit would be $1000-$1500.
Price
for this kit: $250.
Multimode ST-Compatible Connectors
We have 500, multimode, ST-compatible connectors with ceramic ferrules. In training, we obtain typical loss of 0.30 dB/pair. The crimp sleeve requires crimp nests of 0.197 and 0.137". The boots are for 3 mm diameter jackets. You can install these connectors with either epoxy or quick cure adhesive for training or field installation.
First come, first serve. When we run out, we do not expect to be able to obtain more at this low price.
The
price of comparable products is $1.60-2.00.
Our
price for 100 connectors, while they last: $110.
Adder for used crimper: $30
Singlemode SC Connectors
We have a limited number of singlemode [blue outer housing in compliance with [TIA/EIA-568-B], SC connectors with ceramic ferrules. Typical loss is 0.30 dB/pair. The crimp sleeve requires crimp nests of 0.197 and 0.137". The boots are for 3 mm diameter jackets. You can install these connectors with either epoxy or quick cure adhesive for training or field installation.
First come, first serve. When we run out, we do not expect to be able to obtain more at this low price.
The price of comparable products is $2.95-5.25.
Our price for 100 connectors, while they last: $185
Adder for crimper: $30
Fiber on reels for splice training
When training in fusion or mechanical splicing, we use fiber reels with pigtails on the inside end. Two of these reels allow us to measure splice loss with either an OTDR or a test kit. The pigtails on the inner end have ST-compatible connectors. The inner end is protected in a splice tray. The reels are approximately 1 km long. For protection, you store the pigtails in the splice tray.
Splice Training Reel With Protective Cover On Cable
Splice Training Reel With Protective Cover Open
Our
price for a multimode fiber reel of approximately 1 km, with an ST-compatible
pigtail: $175.00.
Our
price for a singlemode fiber reel of approximately 1 km, with an ST-compatible
pigtail: $145.00.
Ribbon fiber on reels for fusion splice training
We have reels of 8 and 12 fiber ribbons with loop backs on both reels. When making a fusion splice, a single OTDR trace will let you measure the loss of the splices on all fibers. Call for details. Pricing depends on availability and ribbon length.
2mm Multimode 62.5 m Cable
We have 10,000 feet of 2 mm, gray cable on 100 foot and 150 foot reels. With a heat shrink tubing, you can use this cable with 3 mm boots for training or field installation.
2mm 62.5 m Cable On Reel
First come, first serve. When we run out, we do not expect to be able to obtain more at this low price.
The price of comparable products is $0.088-0.122 per foot.
Our
price for 100 foot reels, while they last: $7.00.
Our price for 150 foot reels, while they last: $10.00.
Demonstration cleavers
These cleavers are suitable for demonstration of mechanical splicing. Highly experienced installers can obtain reasonable results. Inexperienced installers will not obtain reasonable results. No guarantee on their performance, as their performance is sensitive to the operator procedure. The new price is $180- $300. Our price: $55.
our Lowest Cost Fusion Splicer
This low cost fusion splicer is ideal for the trainer, the novice installer, demonstrations, and the experienced splicer. The splicer runs from internal battery or AC power supply. The novice splicer can use this for multimode fiber. Our price: $800. Splicer comes with carrying case, groove cleaning tool, instruction manual, and power supply.
Preformed Line Products Fusion Splicer
Sumitomo 61 ribbon and single fiber fusion splicer
Sumitomo 61 ribbon and single fiber fusion splicer. This unit does not function and is not repairable. It is available as a source for parts. Call for details. The cleaver for this splicer is $375. We test all cleavers prior to shipment to ensure cleave angles below 1 degree.
Pearson Technologies Web Sites
http://www.ptnowire.com http://www.FTTDnow.info
http://www.fiberopticlawsuits.info http://www.sfoi.info
Pearson Technologies Inc.